Direct MotorSport International, LLC

CUTTING-EDGE TECHNOLOGY

RELIABLE CUSTOMER SUPPORT

Direct MotorSport International, LLC  >> Laser Pro Park  >> Laser Pro Park Wireless Package (Car)

Laser Pro Park Wireless Package (Car)

Laser Pro Park Wireless Package (Car)|escapeBuy one of our LPP Combo Kits and $ave!!

This version can easily be DIY installed by a complete novice, with little or no experience of car electrics.

This is a combination package consisting of the standard single head Laser Pro Park laser diode parking system plus a Cheetah Wireless Installation Kit (SKU # CH01-WFKC).

Features
* Save versus buying these items separately
* Hassle free installation in a fraction of the normal time
* No tricky hardwiring - simply connect to battery terminals
* Unique Smart power supply only turns on LPP for as long as the engine is running
* Wireless - No difficult cable runs
* No drilling through firewall or dashboard
* Perfect for lease cars - no permanent fittings or marks
* Tiny discreet in-car warning unit - mount anywhere
* Additional Laser Sensor available for additional front or rear protection.

$724.98 Save 24%
$549.99
Details
Weight 7.00 lbs
Price: $549.99

Options
Quantity
Detailed images ¬
Cheetah Wireless Kit|escape LPP Kit|escape

Official U.S. version (8.3na). Backed by a full U.S. warranty and U.S. based support.

Kit comes with 1 Laser Sensor, Junction Box, Installation Hardware, Wiring Loom (for connection to wireless module), and Cheetah Wireless Fitting Kit (WFK).

Laser Protector USA, Ltd. maintains an authorized dealer network throughout the United States which protects you from buying used, illegally imported, or fake Laser Protector products. In addition, the Laser Protector warranty only covers products purchased from an authorized retailer in the country where the purchaser resides.


Attributes
Loudness of warning sound: 85dB
Wavelength: 904 nm
Laser class: Class 1M
Wiring Loom: On/Off switch, Mute button, LED, piezo warning speaker

Duration of Self Diagnostic
1 sec during every activation (red and green LED light up and speaker sounds)

Indication of Functionality
Bi color LED blinks every 1 sec to visually confirm operating status. Bleeping of the parking sensor should an object be within 15 feet (depending on the reflectivity of the object).

Operation
• Start mode - first few seconds after activation - self diagnostic
• Search mode - lasts until detection of LIDAR laser beam
• Alert mode - upon detection of laser signal – reflected from own laser sensor or in the unlikely event of other laser based systems using the 904nm frequency in close proximity

Programming
The unit is factory set to alert the user should the laser sensor detect other laser based systems operating on the same 904nm frequency. To prevent interference the unit is designed to switch itself of after 8 seconds and then reboot 60 seconds later. If the user requires permanent protection rather than the factory set 8 seconds, the user needs to switch this function on.

Testing the System
The system performs a self test on power up. Thereafter the unit will pulse green every second to show correct operation. Should the unit fail at any time you will be notified by a continuous audible tone and red LED. The unit can be tested by placing a piece of paper close to the lens and moving it towards the sensor.

Accessories
Additional Laser Sensor heads. The unit is supplied with one laser sensor but the junction box can accommodate an additional laser sensor. Please contact your supplier should you need an additional sensor fitted. For the latest range of accessories please visit your local authorized reseller or Laser Protector USA's website.

General
Please note the detection distance can vary from 0 – 15 feet and depends on the reflective properties of the object immediately in front of the vehicle. The more reflective (e.g. brighter colors), the further the detection distance. The system must not be relied upon entirely when parking your vehicle as there can be no substitute for good judgement.

Use Extreme Caution
The Laser Sensor emits invisible laser radiation which may be harmful to the human eye. Please take particular caution when fitting the unit. Under no circumstances should you look directly at the device while the unit is switched on or connected to a live power supply.

Disclaimer
The manufacturer and/or its suppliers cannot be held responsible for system malfunction and any consequential damage. From time to time clean the front of the lens and check for damage. To prevent possible damage to the eye please avoid looking into the front of the lens.

Specifications subject to change without notice.
Your name: *
Your e-mail: *
Recipient's e-mail: *

 Send to friend 
Product rating

Voting